Washing & Drying


Jenfab Drum Washers


Jenfab LJ Rotary Drum Aqueous parts washers are standard economically priced small compact self contained machines that clean parts fed on a continuous basis. Ideal for inline cleaning from stamping presses, cold headers, thread rollers molding, dies casting and screw machines or for installation as stand alone cellular parts washers. A combination of spray cleaning and immersion cleaning is used to clean the parts as they gently rotate inside the drum. The 15” diameter drum processes up to 5 cubic feet/hour of parts while the 19” diameter drum processes from 10-20 cubic feet/hour of parts. These standard machines are available with one or more tanks for various process including parts washing, passivating, wax coating and drying.
 
    Ideal for Cleaning:
  • Small Die Cast parts
  • Stampings
  • Powder Metals
  • Rivets
  • Machined Parts
  • Castings
  • Eyelets
  • Rubber / Plastic Parts
  • Fasteners
  • Deep Drawn
  • Ammunition
  • Screw Machine
  • Cold Heading
  • Electronic
Jenfab Mini-Drumwasher

Jenfab Conveyor Spray Washers


This is the most versatile, compact, energy efficient conveyorized spray washer available. The flexible design offers up to three tanks for washing, rinsing, and rust prevention/sealing. The energy efficient dryer incorporates a regenerative blow off with stainless steel air knives. The tanks and housing are 304 stainless steel for longest life and lowest maintenance. Jenfab Spray Washers are more energy efficient and can provide savings of thousands of dollars per year. The reason is in the engineered spray system which is designed for each application. The amount of spray (gpm) and operating temperature can effect the operating cost by several dollars per hour. Jenfab’s Spray Washers use only the amount of spray necessary to meet the specified cleaning requirement. For example spray washing automotive stampings usually does not require the the amount of spray necessary to clean intricate machined parts.
 
    Ideal for Cleaning:
  • Die Cast
  • Stampings
  • Powder Metals
  • Deep Drawn
  • Machined Parts
  • Castings
  • Screw Machine
  • Fine Blanked
  • Cold Heading
  • Forging
  • Gears
  • Other
Jenfab Mini-Beltwasher

Giant Industrial Parts Washers


Giant Finishing’s continuous belt washers were developed to provide high volume, efficient cleaning and drying of parts with simple geometries. Parts can be loaded directly on to the belt or put into containers.

Standard Giant belt washers are available in widths: 12”, 18”, 24”, 30”, 36” and 48”.

Customized units with belts as wide as 96” are available upon request.

360 degrees of spray coverage


 
Giant Parts Washer
Giant Parts Washer Giant Parts Washer